The Different Types Of Mics And Their Uses

The Different Types Of Mics And Their Uses

Microphone Gear Guides

These guides explain what you need to consider when buying microphones and also show you which mics have the highest Gearank scores:

This article will help you understand what the main kinds of microphones are that are used in music production, both live and recording, and what each type of mic is typically used for.

Microphone Polar Patterns

Polar patterns describe how microphones pick up sound, showing specifically where mics 'listen' spatially and which positions are blocked. Having a good grasp of these polar patterns will help you select the right mics that capture the sound that you need while minimizing unwanted noise.

Cardioid Microphones

Cardioid polar pattern Cardioid mics capture everything in front and block everything else. This front-focused pattern will let you point the mic to a sound source and isolate it from unwanted ambient sound, making it ideal for live performance and other situations where noise reduction and feedback suppression are needed. Cardioid mics surpass other polar patterns by far in terms of popularity, used widely in live performances, from karaoke to big arena concerts. Other common uses include miking loud instruments like drum kits and guitar speakers. Note that these types of mics add subtle sound coloration when the source is off axis, which is why mic position when speaking and singing is very important.

Super/Hyper Cardioid Microphones

Supercardioid polar pattern Hypercardioid polar pattern These mics have the same front directionality, but have a narrower area of sensitivity compared to cardioids. This results in improved isolation and higher resistance to feedback. Because of their enhanced ability to reject noise, you can use these for loud sound sources, noisy stage environments or even for untreated recording rooms. On the flip side, back rejection is a bit compromised, so you will have to position unwanted sounds like stage monitors and drum kits on the dead spot sides.

Omnidirectional Microphones

Omnidirectional polar pattern These are microphones that capture sound from all angles. Because of their non-directional design and zero rejection, these mics capture nuances better, resulting in a more natural sound. You can use these mics in studios and other venues (like old churches) with great acoustics, and can also be used for live recording of multiple instruments, as long as the noise level is low. The obvious downside is that they lack background noise rejection and are prone to monitor feedback, which makes them unsuitable for loud and noisy venues.

Figure-8 Microphones

Figure-8 polar pattern The name of this pattern is derived from its graphical representation, which looks like the number 8. The long and short of it is that Figure-8 mics capture the sound of both the front and back, while rejecting the two sides. This front and back sensitivity makes them idea for stereo recording and for capturing two or more instruments. They are essentially like omni directional mics, but with sound rejection on two sides. Although not as popular as other polar patterns, the figure-8 is commonly used on ribbon mics and on some large diaphragm condenser microphones.

Shotgun Microphones

Figure-8 polar pattern Shotgun mics, also called Line and Gradient, feature a tube like design that make their polar pattern even more directional than hyper cardioids. The capsule is placed at the end of an interference tube, which eliminates sound from the sides via phase cancellation. This design results in a tighter polar pattern up front with longer pickup range. Although Shotgun mics are more commonly used for film and theatre, they also make great overhead mics for capturing things like singing groups, chorals, drum cymbals. .

Switchable/Multi-Pattern Microphones

These are microphones that can change between different polar patterns, allowing for versatile placement. Many of today's USB condenser microphones have this feature, letting you switch between multiple patterns by simply flicking a switch. Others provide the same flexibility through changing the mic head. The advantage that these mics offer is obvious, more positioning possibilities and more usage. Just remember to be careful when handling these mics, you don't want to accidentally damage the extra moving parts and circuitry that give them their versatility.

Diaphragm Sizes

Microphones pick up sounds through their diaphragm, a thin material that vibrates when it comes into contact with sound. This vibration converts sonic energy into electrical energy. While there is no actual standard unit of measurement, there are currently three main classifications for mic diaphragms, all of which are referring to the diaphragm's mass. The size of the diaphragm affects the microphone's sound pressure level handling, sensitivity, dynamic range and internal noise level.

Small Diaphragm

Small Diaphragm MicrophoneMics with small diaphragms are commonly called pencil mics because of their thin cylindrical shapes. Their compact design makes them lighter and easier to position, and interestingly, they are designed to be stiffer, to handle higher sound pressure levels and have wider dynamic range. You can use them on acoustic guitars, hi-hats, cymbals, and other instruments. Known limitations of this particular diaphragm type are increased internal noise, and low sensitivity.

Large Diaphragm

Large Diaphragm MicrophoneThe bigger the diaphragm, the more it can sense air vibrations, and the more vibrations are captured, more of the sonic details are faithfully reproduced. Unlike small diaphragms that are stiff, large diaphragms move easily, allowing them to detect even faint differences in sound pressure levels which result in a more transparent and natural sound. This affinity to fidelity has made large diaphragm mics a staple in recording studios, and they are now the most common configuration used on modern USB mics. You can use them to record just about anything, from vocals to guitars and other instruments, just make sure that you keep the volume in check because they can distort when the sound pressure level is increased.

Medium Diaphragm

Medium Diaphragm MicrophoneMedium Diaphragm mics are sometimes called hybrid because they combine the characteristics of small and large diaphragms. They tend to have a slightly fuller and warm sound similar to large diaphragms while retaining some of the high frequency content that small diaphragms could. These are modern microphones that are gaining reputation in both live and recording situations, but essentially, you can skip on these mics if you're setting up a small home studio or a small venue, especially if you already have large and small diaphragm mics to work with.

3 Types of Microphones used in Music

Here are the three types of microphones most commonly used in music, available with either XLR or USB connectivity. Note that USB powered versions don't require phantom power.

Dynamic

Dynamic MicIf you're looking for something reliable and versatile, then you ought to start with dynamic mics. Thanks to their moving coil magnetic diaphragm, these mics reliably capture sound and can do so even at high sound pressure levels. As such, you can use them for miking loud sound sources like bass and guitar amplifiers, and even drum kits without worrying about unwanted distortion or damage. Finally, they are not just for high SPL (Sound Pressure Level) applications because they work quite well in quieter settings.

Condenser

Condenser MicCondenser mics have a thin conductive diaphragm that sits close to a metal backplate. This configuration works like a capacitor wherein sound pressure vibrates the diaphragm which in turn changes the capacitance to produce the audio signal. Since they use capacitance instead of actual moving coils, fidelity and sound quality is improved, making these mics ideal for precision recording in the studio. Note that this method of sound capture requires power, so you'll need a mixer or direct box with phantom power (except in cases where batteries are used). Whatever instrument you are trying to record, condenser mics will get the job done so long as the sound pressure levels aren't too high. Just remember to handle them with care as they are not as sturdy as dynamic mics.

Ribbon

Ribbon MicWhile these mics are no longer as popular, Ribbon mics were once very successful particularly in the radio industry. The light metal ribbon used in these mics allows it to pickup the velocity of the air and not just air displacement. This allows for improved sensitive to higher frequencies, capturing higher notes without the harshness while retaining a warm vintage voicing. These days, interest for Ribbon mics have returned, especially since modern production ribbon mics are now sturdier and more reliable than their old counterparts, making them viable for live multi-instrument recording on venues where noise level is manageable. You can also use them for recording if you're looking for vintage vibe, or you can set it up in combination with dynamic or condenser mics for a more open sounding track.

Practical Microphone Applications in Music

Here we look at the main purpose each kind of microphone is typically used for. This is a good guide to get you started and once you gain experience with each mic type you'll find additional applications that work for you.

Vocals

Mic for VocalsFor live vocal performances where stage volume can get loud and feedback suppression is important, the best choice is to use cardioid mics - see our guide to the best microphones for singing live. Recording vocals on the other hand is a different undertaking that requires more attention to the singer's nuances, as such large diaphragm condensers work best. If you are going for a more vintage sounding vocal recording, use ribbon mics or go for good old dynamic mics instead. In addition, small diaphragm omnidirectional mics and shotgun mics can be used for capturing choirs and singing groups, and are especially useful when choirs perform in venues with great acoustics, like churches.

Drums

Mic kit for DrumsBecause acoustic drum kits are naturally loud and punchy, you'll want to go with dynamic cardioid mics for the snare, bass and toms. Small diaphragm microphones can then be used to capture the nuances of the hi-hat, ride and cymbals. For best results, there are specialized mics that are fine tuned to handle the different frequencies and SPLs of each part of a drum kit, you can either get them one by one or go for convenient drum kit mic bundles. In the studio, you can setup an Omnidirection or ribbon mic to blend in some ambience into your drum tracks.

Electric Guitar Amplifier

Mic for Electric Guitar AmpsClose mic'd guitar amplifiers are as loud, sometimes louder than drum kits, and as such they require mics that can handle high SPL. Your best bet is a cardioid or hyper cardioid dynamic mic that is well positioned in front of the amp speaker. Again a second condenser mic or ribbon mic, set back at a distance, can be used in case you are using multiple amps or if you want a warmer more classic sounding output, or in combination with a close mic to capture some of the room ambiance.

Acoustic Guitar

Mic for Acoustic GuitarAcoustic guitars when not amplified have a softer sound with immersive nuances. These type of instruments require the fidelity and quality of large diaphragm condenser mics. You can also go for a well placed Cardioid condenser mic or Figure-8 pattern ribbons depending on the situation and noise level. Finally, setting up an extra small diaphragm mic will work wonders in capturing the higher frequencies that sometimes get lost when acoustics are plugged in or miked directly up front.

Microphone Summary

We've talked about the main types of microphones you'll use in various situations, however as you gain experience you'll also learn how to break with convention. If there's anything more you would like to know about microphones then please feel free to ask in the comments below.

Comments

That should work just fine -

That should work just fine - it's common practice in musical theater and I've used wireless lavaliere mics (the technical name for lapel mics) in that context successfully many times.

Hi. I am looking for a mic

Hi. I am looking for a mic suggestion for vocals where I picture the mic will be on boom over a large drum with multiple singers sitting around it. I intend to mic the drum with a kick mic on a short stand from below.

It would be ideal if the vocals mic could somehow reject below it to some extent as the drum can be very loud.

The room is big and the speakers are a long way from each drum. But it is a large gymnasium so acoustics are lively.

To make matters worse it can't be too expensive (unless you suggest a mic I have lol) . I need to mic 4 groups at the same time.. I do this event only once a year.. and due to cultural protocols there is no money exchanged.

... But I want to do it right so I'm open to any ideas.

Right now I have one wireless 58 on a boom stand and a tech moves it from drum to drum between songs. none of the singers are on axis so they sound far away, and the drum is boomy because the mic is too far above it.

Any help, is very appreciated.

Pages

Post a Comment or Question

Filtered HTML

  • Web page addresses and e-mail addresses turn into links automatically.
  • Allowed HTML tags: <a> <em> <strong> <cite> <blockquote> <code> <ul> <ol> <li> <dl> <dt> <dd>
  • Lines and paragraphs break automatically.

Plain text

  • No HTML tags allowed.
  • Web page addresses and e-mail addresses turn into links automatically.
  • Lines and paragraphs break automatically.

Comments

  • Allowed HTML tags: <a> <em> <strong> <b> <cite> <blockquote> <code> <ul> <ol> <li> <dl> <dt> <dd>
  • Lines and paragraphs break automatically.