The Best Passive PA Speakers Under $1000
Author & Contributors
Raphael Pulgar
I've been an audio engineer for 20 years specializing in rock and metal recordings, and also I play guitar and produce original music for my band and other content creators.
The Best Passive PA Speakers Under $500
This is the price range where most people get their passive speakers from, so it's not surprising to know that this is where competition gets really tough - with manufacturers continually improving the quality of their products. A $1000 budget affords you two or more of these speakers, and some will even give you enough change for getting accessories.
Yamaha BR12
Yamaha is a trusted brand for their speakers and pro audio gear. Given the legacy of their passive studio monitors, Yamaha carries over their expertise with passive speakers onto sound reinforcement with the Yamaha BR12.
The BR12 features a 1" Titanium compression driver for clarity even at higher volumes.
Features:
- 12" LF Driver
- 1" Titanium compression driver
- Program Power: 300W
- Peak Power: 600W
- Sensitivity: 97dB sensitivity
- Impedance: 8 ohms
- Frequency Range: 65Hz-20kHz
- Weight: 35.2 lbs.
Pros
Consistently reported positives are the build quality of the speaker. A few who have had the unit for a while say that they still work perfectly as the day they got them. The sound quality was praised to work well for small to medium venues that require a more upfront sound especially for voices.
Cons
The carpeted finish was noted to fray over time especially with repeated handling. They also catch a lot of dust on more permanent installations.
Overall
If you're looking for a neutral to midrange focused passive speaker that sounds excellent for voices, the Yamaha BR12 is a great pick.
JBL JRX215
JBL was already winning big awards a few years after it was founded in the late 1920s. And up to this day, they continue to be a household name when it comes to quality musical equipment, more specifically speakers.
The JRX215 follows after the company's legacy of accessibility and quality, it is an affordable passive speaker with a 15" woofer and 1" tweeter.
It has good power handling for the price and also sports an impressive peak capacity of 1000W, more than capable of being driven hard.
Since its from JBL, you can be assured of quality and reliability that will give you years of good use.
Features:
- 15" LF Driver
- 1" HF Driver
- Continuous Power: 250W
- Program Power: 500W
- Peak Power: 1000W
- Sensitivity: 1W/1m: 99 dB
- Impedance 8 ohms
- Frequency Range: 41 Hz - 18 kHz (-10 dB)
- Maximum Peak SPL: 129 dB
- Weight: 60.5 lbs.
Pros
As expected of JBL, sound quality gets the most commendations, with many describing it as clean and detailed. Some comment that it sounds good even when driven hard, with its low-end handling exceeding their expectations given its price. The JBL JRX215 continues to gather commendations from users who are happy with how good it performs at various events including concerts, church programs and band performances.
Cons
To get the price this low, JBL somewhat compromised on the cosmetics department, so don't expect much in terms of aesthetic appeal. Still, if you are after great sound as you should be, these are but minor gripes.
Overall
This is a great budget speaker from a reputable manufacturer, which should be considered when you're looking for a good 15" passive PA speaker.
Peavey PV 215
The PV 215 is a passive speaker with two 15" woofers and a 1.4 inch titanium diaphragm tweeter.
It is part of Peavey's "Performance & Value" (PV) series, which gives you more features per buck.
It has two 15" woofers with 2-3/8" voice coils that work in conjunction with the RX14 compression driver via its built-in crossover.
This speaker is designed to handle 700 Watts program up to 1400 Watts peak, and is housed in a trapezoidal enclosure with carpet covered exterior and metal front grilles.
Features:
- 2 x 15" LF Driver
- 1.4" HF Driver
- Program Power: 700W
- Peak Power: 1400W
- Crossover: 2.6kHz
- Impedance: 5 ohms
- Frequency Range: 58Hz-17kHz (±3 dB, half space)
- Maximum Peak SPL: 123.5dB
- Weight: 79 lbs.
Pros
True to its name, the PV 215 is well received for its combination of good performance and value. It gets commendations for its solid build, and for its sound quality. Many commend it for providing clear sound even when driven hard. Being made by Peavey also means that this is a speaker that will last a long time, and this is reflected in reviews.
Cons
There are a few who aren't too happy with its bass emphasis, but this maybe due to personal preference.
Overall
The Peavey PV215 is a good value passive speaker that packs a lot of punch for the price.
Best Passive PA Speakers from $500 to $1000
Based on our analysis, these are worthwhile investments that provide years of reliable use, mounting versatility, loudness and great sound.
Yamaha Club V Series S115V
From bars, to clubs, to houses of worship, the Yamaha Club series has been used in all types of venues and settings through the years.
And on its 5th generation, Yamaha updated the design with larger enclosures, stronger grilles, improved drivers and more - to make them viable for the needs of modern stages while still retaining accessible price tags.
The S115V is included in this line up, and is easily one of the most popular and highly rated 15" passive speakers in the market today, thanks to its impressive specs on paper, which translates well in real world use.
Features:
- 15" LF Driver
- 2" HF Driver
- Continuous Power: 250W
- Program Power: 500W
- Peak Power: 1000W
- Sensitivity: (1W@1m) 99 dB (On-Axis)
- Impedance 8 ohms
- Frequency Range: 55Hz - 16kHz (-10 dB)
- Maximum Peak SPL: 129dB
- Weight: 64.8 lbs.
Pros
Yamaha is known for the quality of their entry to mid-tier level equipment, and this applies to the S115V as attested to by its many positive reviews. Many find its volume and sound to be really good for the money. Longevity is also a common theme among its many positive reviews, some even report using the S115V for years without much issue, and praising it for its consistent and reliable performance.
Cons
There are a few who wish for a more low frequency response, for use in bass-heavy music. Another point of contention is how "old school" the speakers look, but it shouldn't be an issue unless you already have modern looking speakers to match it with.
Overall
This speaker is highly recommended for small to medium sized venues, specifically if you need speech clarity and the ability to handle full band performances in one unit.
QSC E110
QSC is well known for premium quality pro audio equipment, and this same high-level of attention to detail is found in the EC110.
Compared to others in this price range, this 2-way speaker seem a bit small with its 10" die-cast aluminum woofer and 1" tweeter. But it has good power handling, rated at 300W Continuous and can go up to 1200W Peak.
Still coming from a speaker that bears the QSC brand, what sets it apart is the sound quality that it produces.
It comes in a trapezoidal plywood cabinet that allows this passive speaker to work as a floor monitor when needed.
Other features include 85-degree DMT waveguide, and multiple mounting options that include pole and fly.
Features:
- 1 x 10" Die-cast Aluminum LF Driver with 2.5" Voice-Coil
- 1 x 1" HF compression driver with 1.75" Voice-Coil
- Continuous: 300W
- Peak Power: 1200W
- Crossover: 1.8kHz
- Impedance: 8 ohms
- Frequency Range: 50Hz-20kHz (-10 dB)
- Maximum Peak SPL: 126 dB SPL @ 1m
- Weight: 44 lbs.
Pros
Given the price, owners of the QSC E110 expect nothing less than premium quality, and that is exactly what they got based on their reviews. It is described as having a very clear sound that works well with different musical styles and applications, some even recommend it for studio monitoring use!
Cons
A few users recommend adding a bit more bass via EQ to fatten the sound.
Overall
If you're looking for a premium passive PA speaker and you have the budget for a QSC then definitely check this out.
Peavey SP2 v2
The Peavey SP2 V2 not only looks modern and aggressive, it sounds incredibly loud and punchy with a 15" BWX speaker paired with a 2" HF Driver with power handling of 1000W (program power) and up to 2000W (peak).
Dispersion is handled by Peavey's Quadratic Throat Waveguide Technology which spreads the sound 15 degrees upward and 35 downward so little energy is wasted towards the ceiling.
Features:
- 15" BWX Black Widow Speaker
- 2" RX 22CT Compression Driver
- Continuous: 500W
- Program Power: 1000W
- Peak Power: 2000W
- Sensitivity: 1W/1m: 97 dB
- Impedance 8 ohms
- Frequency Range: 64 Hz to 17 kHz
- Maximum Peak SPL: 130 dB
- Weight: 55.0 lbs
Pros
Some users liked the great combination of robustness, light weight, loudness and projection the Peavey SP2 v2 brings to their setups. The capability of bi-amplification was also a welcome feature for those that seek more versatility with regards to amplification. Maintenance was also noted to be easy as the speaker assembly within the enclosure is accessible.
Cons
One thing that users take note of is that the horn is wide coverage but short throw so bear this in mind when considering the speakers for spaces that are longer than they are wide.
Overall
The Peavey SP2 v2 is a great value for its robustness, ease of maintenance and sheer power. Get it if you need a passive speaker for your venue that can really pack a punch.
Yamaha Club V Series S215V
The S215V is part of the latest iteration of Yamaha's popular Club series speakers, meant to meet the demands of mobile DJs, gigging bands and churches and other event venues.
It houses dual 15" woofers that are custom made for them by Eminence, each one featuring curvilinear cones, OFC voice-coils, and strontium ferrite magnets.
It also features a 2" tweeter that is much bigger than the average speaker, allowing for higher output.
All these are packed inside a hand-assembled particleboard cabinet made from renewable resources (southern yellow pine).
Features:
- 2 x 15" LF Drivers
- 2" HF Driver
- Program Power: 1000W
- Peak Power: 2000W
- Crossover: 1.5kHz
- Sensitivity: 99db SPL (1W, 1m)
- Impedance 4 ohms
- Frequency Range: 42Hz-16kHz
- Maximum Peak SPL: 132dB
- Weight: 104 lbs.
Pros
Many describe the S215V as deep and full sounding speaker, ideal for electronic music, dance, DJs and similar styles that require more low end. It also gets commended for being solid and durable, as expected from a Yamaha branded gear.
Cons
Not many complaints about its performance, but there are some who caution that this speaker is quite heavy.
Overall
With its big brand backing and premium specs, this speaker will make a great addition to any PA system.
JBL PRX425
JBL is easily one of the most familiar brands when it comes to speaker cabinets, so it's not surprising to find them taking a couple of slots in this list.
The JBL PRX425 speaker cabinet houses two 12" woofers (also called LF "Low Frequency" drivers) that provide increased volume and low-end while still retaining the balance and clarity expected of 12" speakers.
While they maybe pricey, the cost is justified by dual LF driver design and high power handling, allowing it to easily fill up mid-size venues without the need for subwoofers.
It also comes with SonicGuard technology which protects the HF driver from excessive power.
Features:
- 2 x 15" LF Drivers
- 1" HF Driver
- Continuous Power: 600W
- Program Power: 1200W
- Peak Power: 2400W
- Sensitivity: (1W@1m) 100 dB
- Impedance 4 ohms
- Frequency Range: 48Hz - 19kHz (-10 dB)
- Maximum Peak SPL: 134dB
- Weight: 74 lbs.
Pros
The common sentiment among owner reviews is that this cabinet can move plenty of air. And in addition to being loud, many are equally impressed with its clarity, even at high volume levels. Some users have successfully employed this speaker on multiple medium to big size venues, covering various events that include ceremonies, speaking engagements, bands and even bass-heavy DJ/Electronic dance music. The majority of reviewers are also very happy with the speaker's overall build quality and reliability.
Cons
There aren't really any complaints about the sound, but it's understandable that some users express concerns about the bulk and weight.
Overall
All in all, this is a great value speaker for those looking for a cabinet that can handle mid to big size venues.
Things To Consider When Buying Passive PA Speakers
-
PA Speaker power ratings are most often listed values for Continuous (also often called RMS), Program (sometimes called Music) and Peak power. But what do these mean?
Continuous power refers to a worst case scenario where you are blasting the speaker with sound at all frequencies (pink noise to be specific) for hours and hours on end. The biggest problem with speakers tends to be overheating and this doesn't allow the speaker to take a break and cool down. Unless you are an avant garde pink noise outfit with pieces lasting hours your actual music won't stress the speakers this hard.
Manufacturers also list Program or Music Power which is just about always double the Continuous Power rating. This is the rating for some version of 'typical' music power loads where there is dynamic range and periods of relative quiet which allows the speakers to cool down.
Peak power refers to how much your speakers can produce for an 'instant' which can both cause a lot of heat and is the limit to which the diaphragm of the speaker can safely move. The Peak power listed is nearly always double the music power and four times the Continuous Power.
- You'd think that matching up the Continuous RMS Power with the output power of your amp would be safest and best bet but it turns out that many recommend a more powerful amp than this rating. A typical recommendation is about double this level which as we've learned above is generally Program or Music Power. So if you have a passive speaker that has a continuous power rating of 500W, the optimal amplifier to use is one rated 1000W or close to that. The reasoning is that apart from getting the most out of your speakers for typical loads, you are less likely to turn you amp up too high which can lead to a clipped/distorted signal rather like a square wave. A clipped signal from you power amp is the worst kind of signal for your speaker and can damage them even at lower power levels. There are even those who recommend an amp that goes all the way up to the Peak Power. On the other hand some recommend that matching to Continuous RMS Power is the safest bet. From our research the main point is to make sure your power amplifier doesn't go into the red whatever the power rating and that using around double the Continuous RMS rating is appropriate for normal music loads.
- The typical load for speakers are 4, 6 or 8 ohms (Ω). The safest route is to have an amplifier that matches the load (4 ohm amp output to 4 ohm speaker). Low impedance speakers cause amplifiers with high impedance outputs to work harder, which result in audio clipping or worse - faster heat build up that may damage your equipment. So pairing your speaker impedance properly is important to preserve your amplifier and speaker, and to have a clear sound.
- The wattage ratings of PA speakers relate to how much power they use up and this doesn't always relate directly to how much sound they can produce. This is because speakers vary in their efficiency at producing sound vs heat. The speaker efficiency rating is called Sensitivity which is how loud in decibels (db) it will be 1 meter from the speakers with 1 watt of power. The overall maximum loudness of the speakers is the Maximum SPL which is also measured at 1 meter in front of the speaker. While this can be a useful comparison point, it's important to point out that this doesn't give you a consistent measure of what levels of clarity and precision there are at these high levels so apart from cranking the speakers and listening from a safe distance, the best method is to check what others have experienced using the speakers in real life situations. Fortunately for you this is what we've done and incorporated into our written analysis.
- Most of the top rated passive speakers have either 12" or 15" woofers with these two speaker sizes considered the most ideal for music PA systems. The general difference is that bigger 15" speakers offer more punch and low end (although not as much as a subwoofer), at the cost of overwhelming some of the highs. They also tend to be more expensive and heavier. 12" speakers offer a more balanced sound for many applications, but may not be enough for bass-heavy music. Also worth considering is the size of the tweeter, the presence of a midrange woofer, and the type of material used for the cone and tweeter.
- Since there are no built-in amplifiers inside the cabinet, passive speakers are expected to be lighter. This makes them ideal for mobile productions that move from place to place. Other portability friendly features to watch out for include stand/hang compatibility, handle location, size, and of course the actual weight.
Power Rating - Continuous (RMS), Program and Peak
Matching with Amplifier Power Ratings
Impedance Matching
Speaker Loudness and Sound Pressure Level (SPL)
Speaker Cone Size
Weight, Portability and Mounting
Best Passive PA Speaker Selection Methodology
The first edition was published in 2016 and the current edition which was published on December 7, 2021.
For this edition, we further increased the total number of speakers we examined to 40. The sources we scrutinized also increased to over 4700, which included the most recent and relevant data up to November of 2021, from various reviews, ratings and forum discussions. Finally, all these data were processed by the Gearank Algorithm, which gave us the rating scores out of 100 that helped us further narrow down the list to just the very best. Like the previous editions, the recommended list is divided into two price brackets for convenience. For more information about our methods see How Gearank Works.
Passive PA Speaker Summary
If you feel there is a speaker which should be included above, first check to see if it's in our Music Gear Database, then let us know in the comments below if you would like us to consider including it.
About the Author and Contributors
Here are the key people and sources involved in this guide's production - click on linked names for information about their music industry backgrounds.
Lead Author & Researcher
Raphael Pulgar
I've been an audio engineer for 20 years specializing in rock and metal recordings, and also I play guitar and produce original music for my band and other content creators.
Aside from endlessly window shopping and watching hours of gear reviews for leisure, he enjoys playing competitive FPS games, MMORPGs and caring for his 5 cats. He is primarily influenced by guitarists like Kurt Ballou and Paul Gilbert. His favorite pieces of gear are his Ibanez RG550RFR, Orange Brent Hinds Terror amplifier and EQD Acapulco Gold fuzz.
Contributors
Alexander Briones: Supplemental writing.
Jason Horton: Supplemental research, Editing and Illustrating.
Media
Main/Top Image: By Gearank.com using photographs of the JBL PRX425, QSC E110 and Yamaha BR12.
The individual product images were sourced from websites, promotional materials or supporting documentation provided by their respective manufacturers.
Comments
Publication of our December
Submitted by Jason Horton on
Publication of our December 2021 Edition resulted in the following speakers coming off the recommended list above:
I believe the ZX3 comes with
Submitted by Barrie Hutton (not verified) on
I believe the ZX3 comes with 2" HF & a 12" LF, not a 1" HF, 2" Mid & 12" LF as stated.
Our November 2020 update
Submitted by Jason Horton on
Our November 2020 update resulted in the following speaker coming off the recommended list above, but you can still see our analysis of it: Yamaha CBR15.
You have reviewed many Samson
Submitted by Pete (not verified) on
You have reviewed many Samson Pro Equipment, but I have yet to see you review their PA Speakers, not those toys with questionable headroom designated as active speakers mind you, The passive ones, and at least the 15" 2 way ones..
Yes we have rated many Samson
Submitted by Jason Horton on
Yes we have rated many Samson products (see them here).
We focus our analysis on gear that's available from retailers based in the USA.
Most of the US based music gear retailers don't sell Samson PA speakers, and those that do, like B&H, mainly sell Samson's powered speakers.
If Samson's passive PA speakers become more widely available in the US we will certainly provide ratings on them and consider including them in this guide.
As a result of our October
Submitted by Jason Horton on
As a result of our October 2019 update the following speakers came off our recommended list above but you can still see our analysis of them:
Where does the Peavey SP5G
Submitted by Christopher Thomas (not verified) on
Where does the Peavey SP5G fit in this lineup?
I didn't realize they made
Submitted by Jason Horton on
I didn't realize they were still making them - there are no SP 5 series speakers that I could find listed on the Peavey website here or here.
Can you provide a link to a Peavey product page?
As a result of our January
Submitted by Jason Horton on
As a result of our January 2018 update, the following speakers were removed from our list of recommendations above:
Hey! I have an active15"
Submitted by Naveh Halperin (not verified) on
Hey! I have an active15" Electro-voice speaker (zlx 15p) that's very powerful and weighs 38 lbs. I don't understand why most of the speakers here weigh more, and some of them are only 12" woofers. Is there an explanation for that? I thought passive speakers were supposed to be lighter in comparison. Thanks!
The zlx is plastic, most of
Submitted by Johnny (not verified) on
The zlx is plastic, most of the speakers shown here are made of plywood.
What do you think of the
Submitted by Hampus (not verified) on
What do you think of the Rockville SPG15s? Have you tried them out? I've heard from so many reviewers that you can't get any better sound and punch than them for the price. They do also say it's too high highs, but it's fixed with some EQ though.
Rockville's passive speakers
Submitted by Jason Horton on
Rockville's passive speakers haven't had high enough ratings for us to do any detailed analysis on them in the past. We will be re-examining this category within the next few months so maybe we'll have something to say about them then, but a quick look at the data suggests to me that they'll have a hard time getting better ratings than other brands.
I bought a 1000W Mackie Thump
Submitted by Sponge (not verified) on
I bought a 1000W Mackie Thump 12. Is that a decent loudspeaker for
singing in an outdoor environment?
The Mackie Thump12 is a
Submitted by Jason Horton on
The Mackie Thump12 is a powered speaker, not a passive speaker like the ones in this guide.
You can see its current Gearank score here.
It's not one of the powered speakers that we currently recommend, you can see our recommendations in the guide to The Best Powered PA Speakers.
A question by Burton Brown
Submitted by Jason Horton on
A question by Burton Brown about powered PA speakers has been moved to the Powered PA Speaker Guide.
Thanks for the very helpful
Submitted by Bao Luu (not verified) on
Thanks for the very helpful information. How do you rate the Behringer B215XL vs. B212XL?
I've added the B215XL to our
Submitted by Jason Horton on
I've added the B215XL to our public database so you can compare both the B215XL & B212XL here.
You reviewed the Behringer
Submitted by T Bone D (not verified) on
You reviewed the Behringer VS1520, but I am interested in the more robust B1520 Pro. Any info or comparison to these available?
The Behringer B1520 PRO was
Submitted by Jason Horton on
The Behringer B1520 PRO was originally left out of this list because it wasn't immediately available or didn't have any customer reviews at several major online retailers.
I have just processed it to find its Gearank score and it came out equal to the VS1520 - you can see the Gearank score here.
Really informative! I haven't
Submitted by Dan (not verified) on
Really informative! I haven't bought new speakers in ages, and you just saved me loads of research time. Thanks!
Glad to be of help!
Submitted by Alexander Briones on
Glad to be of help!